PTS
The PTS is a state of the art frequency instrument offering a wide range of features and time and frequency outputs accurate to <40ns rms to UTC(USNO) and 1×10-12 respectively.
This new generation of network appliance is economical and reliable and offers complete remote control and monitoring via a web-browser based interface.
The PTS can be used in either a single or dual redundant configuration and in conjunction with one of Brandywine Communications range of Distribution Amplifiers, such as the FTSU-100.
Applications for the popular PTS include central time and frequency systems, satellite earth stations, military communication systems, and high availability network time servers.
An extremely accurate internal Rubidium oscillator is used as the internal time base that drives all the time and frequency outputs. This Rubidium oscillator is disciplined using an advanced control algorithm, ensuring superior holdover performance. The time constants of this algorithm are user-adjustable to suit specific applications.
The PTS is available both with standard C/A code and optional P(Y) code SA-ASM GPS receiver. It may also be disciplined to an external 1PPS/HaveQuick time code source.
A 10baseT Ethernet port is provided which is used both for monitoring and control of the instrument and for Network Time Protocol. This interface supports both fixed and dynamic IP address assignment via DHCP.
In addition to configuring the PTS, the built-in web browser provides information on GPS, internal monitoring of time errors, and internal parameters of the atomic oscillator. The user may set thresholds of any monitored parameter to trigger an alarm.
A precision 1PPS time mark is available for synchronising or calibrating other equipment and the IRIG B serial time code allows synchronisation to be distributed to other computers, displays and related equipment requiring precise time.
An ASCII serial port outputs any user-selected time of day message at a 1/sec rate for synchronising other equipment. The same output port may also be configured to output 50 bit/sec BCD time code in accordance with ICD-GPS-060.
A high stability 10MHz sine wave output provides an ultra-stable, low phase noise frequency reference derived from an SC cut crystal that is locked to the rubidium reference.
Variations
| Model Number | Description | Base Model | Oscillator Type | Power Supply | Form Factor | Power Type | Output Format | Input Format |
|---|---|---|---|---|---|---|---|---|
| PTS | GPS Precision Time System (Standard Model) | PTS | Rubidium | Single AC | 2U | AC | 1PPS, RS232, 10 MHz, IRIG B, 50-bit BCD | GPS |
| PTS-IRIG-IN | Precision Time System with IRIG Input | PTS | Rubidium | Single AC | 2U | AC | 1PPS, RS232, 10 MHz, IRIG B, 50-bit BCD | GPS |
| PTS-FTSU150-BUNDLE | Precision Timing System with FTSU-150 Distribution Amplifier | PTS | Rubidium | Single AC | 2U | AC | 1PPS, RS232, 10 MHz, IRIG B, 50-bit BCD | GPS |
Features
- Network Time Server
- Dual Redundant Version Available
- Complete Remote Network Control using Standard Web Browser
- SA-ASM GPS Receiver
- 10MHz, 1PPS IRIG B, Serial and Time Codes
- Timing Accuracy 40ns rms to UTC
- 1PPS, Have Quick Inputs
Specifications
1PPS Output
| Connector Type | SMA |
| Signal Type | 5V 0-pk, 10 microseconds wide |
| On Time | Rising Edge |
Serial Interface
| Port Function | Setup and Control |
| Connector Type | DB9 |
| Signal Type | RS232 |
| Baud Rate | 300-115,200 (Default 115k N, 8, 1) |
Sine Wave Outputs
| Number of Outputs | 1 |
| Connector Type | SMA |
| Frequency | 10 MHz |
| Levels | 2.5 Vpp into 50 Ohms |
| Phase Noise (SSB) | |
| 10 Hz | <-130 dBc/Hz typical |
| 100 Hz | <-140 dBc/Hz typical |
| 1 kHz | <-150 dBc/Hz typical |
Time Code 1 Output
| Number of Outputs | 1 |
| Code Format (Link sel) | IRIG B 1kHz or DC level |
| Levels | 2.2 Vpp 600 Ohms HCMOS |
| Connector Type | SMA |
Time Code 2 Output
| Number of Outputs | 1 |
| Code Format | 50 bit BCD ICD-GPS-060 or ASCII |
| Level (Link Selectable) | RS-232 (4,800, N, 8, 1) or BCD |
| Connector Type | DB9 |
| ASCII Format | 1/sec user-programmable string |
Fault Alarm Status
| Output Type | HCMOS Level |
| Output Polarity | User programmable |
| Connector Type | DB9 |
Environmental
| Temperature | |
| Instrument | 0 to + 50°C |
| Antenna | -40 to +85°C |
| Humidity | To 95% non-condensing |
Physical
| Dimensions | 3.25” x 7.25”x 15.8” |
| With Rack Mount Adapter | 19" Rack Mount, 3.48" (2U) height, 15.80” depth in rack |
| Weight | 5.5 lbs. typical |
Power
| Power | 110/230V AC |
| Optional | 24 VDC, -48 VDC, 125 VDC |
