GPSDO
The GPS Disciplined Oscillator Module is a small Commercial –Off-the-Shelf (COTS) GPSDO that has been designed to meet military requirements such as MIL-STD-188-164A. At only 4.1” x 2.75” x 1” (104.0 x 70.0 x 26.0 mm) in size, the unit provides Stratum 1 performance.
Variations
| Model Number | Description | Oscillator Type | Power Supply | Power Type | Output Format | Input Format |
|---|---|---|---|---|---|---|
| GPSDO | GPS Disciplined Oscillator | OCXO | 12 VDC | DC | 1PPS, 10 MHz | GPS |
| CMC | Compact Master Clock | OCXO | 12 VDC | DC | 1PPS, 10 MHz | GPS |
| XMC | XMC Distribution Amplifier | None | 12 VDC | DC | 1PPS, 10 MHz | GPS |
| CMC-ITR | Compact Master Clock - Industrial Temperature Range | OCXO | 12 VDC | DC | 1PPS, 10 MHz | GPS |
| XMC-ITR | XMC Distribution Amplifier - Industrial Temperature Range | None | 12 VDC | DC | 1PPS, 10 MHz | GPS |
Features
- 3 isolated low phase noise 10MHz outputs
- Internal GPS Tracking Receiver
- External 1 PPS input
- Small footprint designed for easy integration
- Disciplined high stability OCXO
The GPSDO supplies three isolated, low noise precision 10 MHz frequency reference signal outputs. These outputs are accurate to 1×10-12 when slaved to a timing supply from an internal GPS tracking receiver.
The frequency standard is also able to slave to an external 1PPS signal to steer and hold the internal oscillator and clock system precisely in time. Time and frequency information maintains its high accuracy with the internal oscillator even when no satellites can be tracked. A serial data port is provided to report time, date, position, and GPS satellite health and signal strength. The GPSDO module also has dual power supply inputs and can operate off either supply input. Optional capabilities include automatic interface to an external military GPS receiver such as the Defense Advanced GPS Receiver (DAGR), Ethernet Interface for NTP time service and SNMP status monitoring. Standard frequency output is 10 MHZ, but other frequencies are possible.
Specifications
GPS Input
| Connector Type | MCX |
| Signal Type | C/A Code |
| Number of Channels | 12 |
| Receiver Sensitivity | -155dBm |
| 1PPS Level | 0-5V |
| Have Quick (opt) | per ICD-GPS-060 |
Power
| Power | 12 VDC +/- 5% |
| Power Consumption | 15W Warm up, 5W nominal |
| Number of Inputs | 2 diodes in an OR configuration |
Accuracy
| Time Accuracy | GPS < 30 ns 1PPS < 30 ns |
| Holdover | <20us in 24 hrs |
Warm Up / Stabilisation Time
| Cold Start | 20 Minutes |
Physical
| Dimensions | 104mm x 70mm x 26mm |
1PPS Output
| Number of Outputs | 1 |
| Connector Type | MCX |
10 MHz Output
| Number of Outputs | 3 |
| Output Level | 7dBm +/- 2dBm (2 outputs) 15dBm +0/-2 dbm (requires +15V supply) |
| Connector Type | MCX |
I/O Connector
| I/O Connections | Power A (12/15VDC) Power B (12/15VDC) Alarm Out 1PPS Input Reset Force Holdover/HQ input (option) RS232 Locked |
Environmental
| Temperature | |
| Operating | -20 to +70 degrees C |
| Storage | -40 to +85 degrees C |
| Humidity | Up to 95% RH (non-condensing) |
| Altitude | 50,000 ft Non-operating 10,000 ft operating |
| EMC Emmission | FCC Part 15, EN55022, EN55024 |
